Офисные стулья являются неотъемлемой частью нашей трудовой жизни. Они обеспечивают комфорт и Поддерживать во время долгих часов сидения. Однако со временем вы можете заметить, что ваш офисный стул starts to sink. This can be frustrating and uncomfortable, but don’t worry, there are solutions. This article will guide you on как не дать офисному стулу упасть.

Понимание проблемы

Офисные стулья are a crucial part of our work environment, especially for those who spend long hours at their desks. However, a common issue that many people face is the sinking of their office chairs. This problem can be quite frustrating, especially when the chair appears to be in good condition otherwise.

Как не дать офисному стулу утонуть
ЧАСош То Стоп Ан Ожжясе Счасаяр Фром Сянкянг

How To Stop An Office Chair From Sinking Down

The primary cause for the sinking of an office chair is usually due to the failure of the hydraulic gas cylinder, which is responsible for adjusting the chair’s height. This cylinder contains nitrogen gas, and when you pull the chair lever, the gas switches chambers inside the cylinder, allowing it to move up and down. Over time and with excessive use, the seal in the cylinder starts to wear out and leak, causing the chair to sink down.

This issue can disrupt your workflow, especially if you’re in a meeting or deeply engaged in a project. It’s not just about comfort; a sinking chair can affect your posture и производительность. While it’s a common annoyance, it doesn’t mean that you need to replace the entire chair. There are several methods to stop your office chair from sinking, ranging from temporary fixes like hose clamps and duct tape to more permanent solutions such as replacing the cylinder.

To prevent your office chair from going down unexpectedly, replacing the cylinder is the most recommended and lasting fix. This process involves measuring your chair’s gas cylinder, purchasing a replacement gas cylinder kit, and replacing the old cylinder with the new one.


When looking for ways on how to keep your office chair from sinking, you’ll find both temporary and permanent methods. Quick fixes might seem appealing for their immediate effect, but they often lack professionalism and durability.

Replacing the Gas Cylinder

To effectively stop an office chair from sinking, replacing the gas cylinder is your best bet. This is a more professional-looking solution that restores the chair’s ability to maintain its height.

замена газового баллона
репласянг тчасе гас сйляндер

To replace the gas cylinder, you’ll need to first remove the base of the chair to access the cylinder. After removing the old cylinder, install a new one to regain proper function. There are numerous online tutorials and guides that can assist you with this process.

Использование хомута или клейкой ленты

For those who need an immediate fix, using a hose clamp or duct tape can temporarily stop an office chair from sliding down. This involves securing the clamp or tape around the cylinder to prevent it from compressing.

Использование хомута или клейкой ленты
Uсянг а ЧАСосе Сламп ор Дтыст Тапе

This method should be considered a short-term solution while you obtain a replacement gas cylinder due to its less professional appearance.

Ремонт гидравлики

If you’re adept with DIY solutions, you might consider fixing the hydraulics yourself. Ensure that the hydraulic fluid is at its proper level and inspect the piston and seals for any damage or wear.

Ремонт гидравлики
ФяИксянг тчасе ЧАСйдратылясс

If these suggestions seem out of your comfort zone, it’s advisable to seek professional assistance or consult with your chair’s manufacturer.

By understanding how to address the issue of a sinking chair, you can save money and extend the life of your office furniture. Whether you opt for a quick fix or decide to replace parts, you can ensure your workday remains Комфортный и продуктивный.

Уход за офисным креслом

To keep your desk chair from sinking, regular maintenance is key. Here’s how to maintain your office chair effectively:

Регулярная уборка и уборка пылесосом

A weekly vacuum using an appropriate attachment ensures that your fabric, plastic, vinyl, mesh, or leather chair stays clean without damage.

Чистка стульев из различных материалов

For fabric chairs, vacuuming might suffice, while leather chairs may require conditioners to prevent cracking.

Правильный уход за роликами

Keep your chair moving smoothly by regularly cleaning out debris from the casters.

Обслуживание цилиндра и гидравлики кресла

If your chair continues to sink after tightening screws, consider replacing your cylinder. Maintain it every six months with synthetic grease.

Крепежные болты и винты

Ensure all bolts and screws are tight to prevent any wobbling or further issues with the chair’s structure.

By taking these steps for routine maintenance, not only will your chair look and work better, but it will also last longer. Even if certain chairs claim no maintenance is needed, a few minutes spent on upkeep can make all the difference.

In conclusion, whether you’re trying to stop your office chair from sinking or simply looking to keep it in top condition, there are several strategies you can employ. Remember to consult with professionals if you’re unsure about any maintenance steps.

How can I tell if my office chair gas cylinder is failing?

If your office chair slowly sinks throughout the day or fails to maintain its height after you adjust it, this is a common sign that the gas cylinder is failing and may need to be replaced.

Is it safe to replace the gas cylinder in an office chair by myself?

Yes, it’s generally safe to replace the gas cylinder by yourself if you follow the manufacturer’s instructions or watch a reliable tutorial. However, ensure you have the right tools and take safety precautions, such as wearing protective eyewear, to prevent injury.

How often should I perform maintenance on my office chair to prevent it from sinking?

Regular maintenance, such as tightening screws and lubricating moving parts, should be performed every six months. However, if you notice any signs of wear or changes in chair performance, you should inspect and address these issues immediately.

Can I use any hose clamp to stop my office chair from sinking, or does it need to be a specific size or type?

The hose clamp used should be of the appropriate size to fit snugly around the cylinder without damaging it. Adjustable hose clamps are often recommended because they can fit a range of cylinder sizes.

What should I do if none of the fixes stop my office chair from sinking?

If temporary fixes aren’t working and replacing the gas cylinder doesn’t solve the problem, it might be time to consult with a professional furniture repair service or consider investing in a new office chair.


Имея более чем десятилетний опыт, я углубляюсь в тонкости эргономичного дизайна, чтобы создать стулья, которые улучшат ваше рабочее пространство и улучшат самочувствие. Мои обзоры и рекомендации созданы для того, чтобы сделать ваше пребывание стильным и комфортным.